|
Refinishing:
|
Prices
|
|
Refinish Pedulla Bass* (includes current Pedulla logo on head stock and fingerboard refinish on Buzz models)
|
$750.00
|
|
Refinish Pedulla ET Thunderbass (Oil/Urethane, No Color)
|
$675.00
|
|
Refinish a Pedulla guitar* (non-bass, older models)
|
$850.00
|
|
Refinish a bass/guitar not made by Pedulla* (must see for exact price)
|
$850.00
|
|
*
Select from finishes/Colors currently offered by Pedulla.
|
|
|
Refinish an ebony, rosewood, or maple fretless fingerboard on a Pedulla bass
|
$325.00
|
|
Refinish an ebony, rosewood, or maple fretless fingerboard not made by Pedulla
|
$375.00
|
|
|
|
|
Conversions of Fingerboards:
|
|
|
Turn a Fretted Pedulla into a lined Fretless with finish on fingerboard
|
$650.00
|
|
Turn a Fretted Pedulla into a lined Fretless without finish on fingerboard
|
$425.00
|
|
Turn a Fretted non-Pedulla bass into a lined Fretless with finish on fingerboard
|
$750.00
|
|
Turn a Fretted non-Pedulla bass into a lined Fretless without finish on fingerboard
|
$525.00
|
|
Turn a Fretless Pedulla bass into Fretted
|
$750.00
|
|
Turn a Fretless unlined Pedulla bass into Fretted
|
$850.00
|
|
Turn a Fretless lined non-Pedulla Bass in to Fretted
|
$850.00
|
|
Turn a Fretless unlined Pedulla Bass into a lined Fretless
|
$850.00
|
|
Add fingerboard refinish after conversion
|
$225.00
|
|
Turn a Fretless lined Pedulla Bass in to a seemingly unlined fretless bass (white lines change to black) (Buzz, Thunderbuzz, and
Nuance only, using black lines)
|
$750.00
|
|
Add fingerboard refinish after conversion
|
$225.00
|
|
Replace fingerboard side dot markers (white or black)
|
$95.00
|
|
|
|
|
Replacement Work: (see Parts for replacement parts)
|
|
|
Replacement neck for TB or RB: Fretted or Fretless, using hardware from original neck. (For new hardware see Parts)
|
$750.00 + old neck
|
|
Fingerboard coating added to new fretless replacement neck
|
$225.00
|
|
Fingerboard replacement for MVP/Buzz or Thunderbass
|
$1,200.00
|
|
Replacement trussrod on MVP/Buzz or Thunderbass
|
$1,200.00
|
|
Replacement trussrod on TB or RB: new neck using hardware from original neck (For new hardware, see Parts)
|
$750.00 + old neck
|
|
Fingerboard coating added to new fretless replacement neck
|
$225.00
|
|
Replacement electronics cavity cover installed on Thunderbolt
|
$50.00
|
|
Replacement electronics cavity cover: made/installed on MVP/Buzz/T/ET -Since each is handmade, bass is required to make replacement cavity cover for MVP/BUZZ/T/ET
|
$250.00
|
|
Gloss Finish (with or without color) on replacement cavity cover for MVP/BUZZ/T/ET
|
$225.00
|
|
Electronics (Replacements/upgrades
in Pedulla basses only. Prices include installation if bass is sent to us at time of electronics purchase. Many parts & pickups originally used in older basses are no longer available):
|
|
|
Pedulla TBT Electronics (for T/TB & older MVP/Buzz): 4 knobs: Vol, Pan, Bass, Treble
|
$325.00
|
|
Pedulla NTMB Electronics (for MVP/Buzz ONLY): 4 knobs: vol, Pan, Bass, Treble, Mid cut/boost switch
|
$425.00
|
|
Pedulla Thunderguts (for Thunderbass/Thunderbolt only): Low-Mid Switch
|
$180.00
|
|
Standard Electronics in older basses with only 3 knobs. (These basses can be converted to the upgraded electronics above))
|
$275.00
|
|
Replacement pickup (price is for each individual pickup)
|
$150.00
|
|
Reshield electronics cavity
|
$100.00
|
|
Other:
|
|
|
Finger Ramp: (for existing Pedulla basses)
|
$500.00
|
|
Install Thumbrest (Mark Egan model)
|
$125.00
|
|
Refret/Fret Job
|
$425.00
|
|
Fret Level & Dress
|
$100.00
|
|
Set-up/adjustments done at time of other services being done
|
$35.00
|
|
Set-up/adjustments when no other services being done
|
$75.00
|
|
Pedulla strings installed at time of set-up
|
click here for price
|
|
Nut Customization/installation (includes nut blank)
|
$65.00
|
|
Troubleshooting/Assessment/Minimum Service Charge
|
$50.00
|
|
|
|